Lga17xx-bcf Bracket 12th Generation 1700 Anti-bending Buckle Cpu Bending Correction Fixing Buckle Aluminum Alloy gray

Description

• This product uses four-sided flat pressure instead of multi-point pressure, accurate positioning, avoids capacitance, and is conducive to CPU fixation.
• The contact surface with the main board is flat bottom, and the original LOTES insulation protection pad of the same specification is used to reduce the pressure on the main board and further reduce signal interference.
• The metal surface is raised to reduce signal interference on the motherboard side.
• Specifications: L 54 x H 70 x W 6mm.

Feature:
1. Anode sandblasting adopts all-aluminum alloy CNC precision machining, multi-color optional.
2. This product only supports Intel 12th generation CPU, the motherboard CPU socket is LGA1700 chipset and H610 B660 Z690 series.
Installation process:
1. Place the motherboard horizontally on the desktop and open the CPU clip.
2. Use the included T20 Torx screwdriver to remove the upper part and set the lower fasteners aside.
3. Put the CPU into the socket.
4. Cover the modified buckle on the top cover of the CPU and move it gently until it clicks into place.
5. Tighten the screws on the opposite corners half a turn. Each screw takes turns in a diagonal half-turn, half-turn, until the screw is screwed in, which will cause uneven pressure on the CPU.

Description:
Name: Diamond Sticker
Model: LGA17XX-BCF
Specifications: L 54 x H 70 x W 6mm
Material: aluminum alloy
Weight: main body 20g; overall 55g
Packing list:
LGA17XX-BCF Corrector Frame x 1
TF72g x 1
L-shaped Screwdriver x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.