Stable Performance Sata3 To M2 Ngff Adapter Card Key B-m Ssd Solid State Drive To 6g Interface Conversion Card Support 30/42/60/80mm black

Description

• suitable for 4 different lengths of SSD hard drives, suitable for different lengths of M2 (NGFF) SSD hard drives such as 3cm, 4.2cm, 6cm, and 8cm.
• Using ceramic filter capacitors, high-power LDO voltage regulator control chip, stable performance!
• Our products have been tested before shipment.
• Support system: WinXP/Vista/Win7/Win8/Win10 32-bit/64-bit MAC/LINUX
• Product model: ENCNF2S-N02;

Description:
Name: Adapter Card
Product brand: ITHOO;
Product model: ENCNF2S-N02;
Adopt master control: none;
Product packaging: electrostatic bag;
Product interface: M.2 NGFF SATA 22PIN;
Support system: WinXP/Vista/Win7/Win8/Win10 32-bit/64-bit MAC/LINUX
Product features: 
transfer the M.2 hard disk defined by KEY-BM SATA of the motherboard to the SATA 22PIN interface, this transfer board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the transfer card does not need a driver . If you can't recognize the hard disk, please check whether it is an M.2 interface, the card is basically not faulty, please know. Supports all SATA standard M2.SSD, does not support the new NVME M2.SSD Important things to say 3 times, does not support PCI-E M2 SSD
The adapter card only changes the interface form of the solid state drive, and does not change any performance of your hard disk. What are your original hard disk parameters, with the adapter card, the output interface performance will not change;
About instructions: 1. Convert M.2 NGFF SSD to 2.5in SATA (6Gbps) interface, 2. M.2 NGFF SSD to 2.5in SATA Adapter Converter supports SATA-based B key and B+M Key M.2 SSD, 3. Maximize system speed by adding M.2 SSD performance, 4. Reduce overall power consumption with high-efficiency M.2 SSD, 5. Support SATA Revision I/II/III (1.5/3.0/6.0 Gbps) , 6. Supports full-length M.2 NGFF (Next Generation Form Factor) SSD solid state drives (2230, 2242, 2260, 2280);
Comments: It does not support PCI-E based "M key" or "M+B key" (NVME AHCI) SSDs (such as Samsung 950PRO / Samsung 960EVO / Samsung 961);
Packing list:
1 x Adapter Card
4 x screw 
1 x Packing bag
Note:
Please make sure the model matches your device before purchasing.